You searched for "Stainless Steel Ball Valve"

T-710

| 316 Stainless Steel One-Piece Conventional Port Ball Valve with Locking Device

The T-710 conventional port .316 stainless steel compact / mini ball valve. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread configuration.

T-715

| 316 Stainless Steel Two-Piece Large Port Ball Valve with Locking Device

The T-715 large port stainless steel ball valve features a heavy-duty two-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle, making it an ideal choice for commercial and industrial applications. The glass-fiber reinforced graphite seats are designed to withstand high-pressure service applications, while the Teflon thrust washer ensures smooth actuation. The T-715 has integral tapped mounting pads for actuator or panel attachment.

T-717

| 316 Stainless Steel Three-Piece Full Port Ball Valve with Locking Device

The T-717 full port .316 stainless steel ball valve features a heavy-duty three-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a Female thread configuration. The body center section lifts or swings out to permit servicing without end adapter removal.

T-712

| 316 Stainless Steel Two-Piece Full Port Ball Valve with Locking Device

The T-712 full port stainless steel ball valve features a heavy-duty two-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle, making it an ideal choice for commercial and industrial applications. The glass-fiber reinforced graphite seats are designed to withstand high-pressure service applications, while the Teflon thrust washer ensures smooth actuation. The T-712 has integral tapped mounting pads for actuator or panel attachment; larger sizes have dual mounting pads.

List Pricing

Find all of Legend's downloadable List Pricing files.

LegendPressCSG

Save time and enhance job site safety with LegendPressCSG fittings. Crafted from durable carbon steel, these press fittings are ideal for fuel gas and compressed air applications. Featuring HNBR O-rings known for their exceptional resilience, these fittings offer superior chemical resistance, minimal compression set, and low gas permeability, ensuring an airtight seal even in the most challenging conditions. LegendPressCSG fittings are available in 29 models and 148 configurations, with sizes ranging from 1/2” to 2”.

M-8330HC Manifold Loop Isolation Valve

| Loop Isolation Ball Valve for M-8330HC Stainless Steel Manifolds

T-710T

| 316 Stainless Steel Mini Ball Valve with Tee Handle

The T-710T conventional port .316 stainless steel compact / mini ball valve with a Tee handle. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread configuration.

T-1002ST

| Forged Brass Full Port Ball Valve with Stainless Steel Ball and Stem

The T-1002 forged brass full port ball valve with a stainless steel stem and ball valve. It features an adjustable gland follower design with a thread end configuration. It is bottom-loaded, teflon isolated, blowout-proof stem.

T-1002STLD

| Forged Brass Full Port Ball Valve with Stainless Steel Ball and Stem and Locking Device

T-712 Valve Stem

| Stem for T-712 Stainless Steel Ball Valves

T-720

| Carbon Steel One-Piece Conventional Port Ball Valve

The T-720 conventional port carbon steel heavy-duty ball valve features a one-piece barstock body design. It has a bottom-loaded blowout-proof stem with a female thread configuration. It is ideal for commercial or industrial applications where port size is not critical.

T-725

| Carbon Steel Two-Piece Large Port Ball Valve

The T-725 large port carbon steel heavy-duty ball valve features a two-piece cast body design. It has a bottom-loaded blowout-proof stem, and a latch-lock handle with a female thread configuration. It has a Fiber reinforced graphite impregnated seat to maintain its shape in high-pressure service. Integral, tapped mounting pad for actuation or panel attachment

T/S-2001 Tee Handle

| Stainless Steel Tee Handle for T/S-2001 Ball Valves

T-710T MNPT x FNPT

| 316 Stainless Steel Mini MNPT x FNPT Transition Ball Valve with Tee Handle

The T-710MxF-T conventional port .316 stainless steel compact / mini ball valve with a Tee handle. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread x female thread configuration.

T-730

| Carbon Steel Two-Piece Full Port Ball Valve

The T-730 full port carbon steel heavy-duty ball valve features a two-piece cast body design. It has a bottom-loaded blowout-proof stem, and a latch-lock handle with a female thread configuration. It has a Fiber reinforced graphite impregnated seat to maintain its shape in high-pressure service. Integral, tapped mounting pad for actuation or panel attachment

M-8330HC Header Isolation Valve, Pair

| Pair of Supply & Return Header Isolation Ball Valves with Thermometers for M-8330HC Stainless Steel Manifolds

M-8330HC Header Isolation Valve, Supply

| Supply Header Isolation Ball Valves with Thermometer for M-8330HC Stainless Steel Manifolds

M-8330HC Header Isolation Valve, Return

| Return Header Isolation Ball Valves with Thermometer for M-8330HC Stainless Steel Manifolds

T-810

| Forged Brass MICRO BALL Valve

The T-810 is a traditional allow full port Micro Ball gauge cock valve featuring a female thread end with an o-ring stem design. The handle is a Dacromet-coated steel short lever design.

T-710 Butterfly Handle

| Butterfly Handle for T-710 Stainless Steel Ball Valves

T-800T

| Forged Brass MICRO BALL Valve with Tee Handle

The T-800T is a traditional alloy conventional port Micro ball valve featuring a female thread end with an o-ring stem design.

T-800TNL

| No Lead Forged Brass MICRO BALL Valve with Tee Handle

The T-800TNL is a no lead conventional port Micro ball valve featuring a female thread end with an o-ring stem design.

T-712 End Adapter Seal

| End Adapter Seal for T-712 Stainless Steel Ball Valves

T-712 Teflon Seats

| Teflon Seats for T-712 Stainless Steel Ball Valves

T-712 Washer and Stem

| Washer and Stem for T-712 Stainless Steel Ball Valves

T-1101NL

| No Lead Forged Brass 3-in-1 Strainer Ball Valve

Compact Chrome FNPT Mini Ball Valve

| Chrome Plated Forged Brass Mini Ball Valve

The chrome-plated full port mini ball valve features a one piece barstock-type body with female thread end. The short-pattern body type can be installed in confined piping installations.

Compact Chrome MNPT x FNPT Mini Ball Valve

| Chrome Plated Forged Brass MNPT x FNPT Mini Ball Valve

The chrome-plated full port mini ball valve features a one piece barstock-type body with female thread x male thread end. The short-pattern body type can be installed in confined piping installations.

S-1001T

| Forged Brass Full Port Ball Valve - Tee Handle

The S-1001T traditional alloy full port ball valve with a tee handle. It features a sweat end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The S-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

S-1100NL

| No Lead Forged Brass Full Port Ball Valve with Drain

The S-1100NL no lead full port ball valve features a sweat end configuration and a waste drain, making line maintenance more convenient than conventional means. It also utilizes the blowout-proof Viton dual o-ring stem design, complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smoother experience when paired with the self-cleaning chrome-plated ball. The S-1100NL also has a corrosion-resistant Dacromet-coated steel handle.

T-1001T

| Forged Brass Full Port Ball Valve with Tee Handle

The T-1001T traditional alloy full port ball valve with a Tee handle. It features a threaded end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The T-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

T-1100NL

| No LeadForged Brass Full Port Ball Valve with Drain

The T-1100NL no lead full port ball valve features a female threaded end configuration and a waste drain, making line maintenance more convenient than conventional means. It also utilizes the blowout-proof Viton dual o-ring stem design, complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smoother experience when paired with the self-cleaning chrome-plated ball. The T-1100NL also has a corrosion-resistant Dacromet-coated steel handle.

T-801NL

| No Lead Cast Brass Ball Valve Test Cock with Screwdriver Slot

The T-801NL no lead cast brass ball valve test cock featuring a male thread by female thread configuration with an o-ring stem design.

T-1002CC

| Forged Brass Full Port Ball Valve with Cap and Chain

The T-1002NL no lead forged brass full port ball valve with cap and chain. It features an adjustable gland follower design with thread end configuration, bottom loaded, teflon isolated, blowout-proof stem.

T-2000MxSNL

| No Lead DZR Forged Brass Full Port MNPT x Sweat Transition Ball Valve

The T-2000 DZR forged brass full port ball valve. It features a bottom-loaded, blowout-proof, gland follower design with positive-seal stem and a threaded by Sweat configuration.

T-1002LD

| Forged Brass Full Port Ball Valve with Locking Device

The T-1002 Forged brass full port ball valve with locking device and an adjustable gland follower design. It features a thread end configuration, with bottom loaded, teflon isolated, blowout-proof stem.

T/S-1002 SS Handle & Nut

| Stainless Steel Lever Handle and Nut for T/S-1002 Ball Valves

T-1009 Compression Nut

| Compression Nut for T-1009 Ball Valves

T-2011RFLG

| Forged Brass Isolation Ball Valve with Rotating Flange

S-1001TNL

| No Lead Forged Brass Full Port Ball Valve - Tee Handle

The S-1001TNL no lead full port ball valve with a Tee handle. It features a sweat end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The S-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

T-1001TNL

| No Lead Forged Brass Full Port Ball Valve with Tee Handle

The T-1001NL no lead full port ball valve with a Tee handle. It features a threaded end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The T-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

T-1001LD

| Forged Brass Full Port Ball Valve with Locking Device

The T-1001 is the traditional alloy full port ball valve with a locking device. It features a threaded end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The T-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

NL FNPT TWHV Recirculator Kit

| No Lead Forged Brass FNPT Tankless Water Heater Valve Kit with Recirculation Valve

NL Press TWHV Recirculator Kit

| LegendPress No Lead Forged Brass Tankless Water Heater Valve Kit with Recirculation Valve

T-1101NL SS 80 Mesh Screen

| 80 Mesh Stainless Steel Screen for T-1101NL Strainer Ball Valves

T-1101NL SS 40 Mesh Screen

| 40 Mesh Stainless Steel Screen for T-1101NL Strainer Ball Valves

T-1101NL SS 20 Mesh Screen

| 20 Mesh Stainless Steel Screen for T-1101NL Strainer Ball Valves

T/S-1001 Lever Handle

| Stainless Steel Lever Handle for T/S-1001 Ball Valves

S-1102NL

| No Lead Forged Brass Full Port Ball Valve with Drain

The S-1102 no lead forged brass full port ball valve with drain. It is a gland follower stem design featuring a bottom-loaded blowout-proof stem with a sweat configuration. The lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws

T-1102NL

| No Lead Forged Brass Full Port Ball Valve with Drain

The T-1102 no lead forged brass full port ball valve with drain. It is a gland follower stem design featuring a bottom-loaded blowout-proof stem with a female thread configuration. Lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws

T-2009NL

| No Lead Forged Brass Full Port Compression Ball Valve

The T-2009NL no lead DZR forged brass compression end ball valve. Its quarter-turn, positive-shutoff full port design, make the T-2009NL the ideal replacement for a leaking multi-turn, drip-tight, reduced port gate valve. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.

200K BTU Pressure Relief Valve

| No Lead Forged Brass Pressure Relief Valve

T-1001LDNL

| No Lead Forged Brass Full Port Ball Valve with Locking Device

The T-1001LDNL is the no lead full port ball valve with a locking device. It features a threaded end configuration and the Viton dual o-ring stem design complete with a tamper-evident locking seal. The Dyneon TFM PTFE seats reduce actuation torque, providing a smooth operating experience when paired with the self-cleaning chrome-plated ball. The T-1001NL also has a corrosion-resistant Dacromet-coated steel handle.

T-900T MNPT x FNPT

| Forged Brass Mini Large Port MNPT x FNPT Transition Ball Valve with Tee Handle

The T-900 MxF forged brass large-port ball valve with tee handle features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly. The tee-handle can be used as gauge-cock isolation valves, without the gauge face obstruction associated with a lever-handle equipped valve.

T-900TNL MNPT x FNPT

| No Lead Forged Brass Mini Large Port MNPT x FNPT Transition Ball Valve with Tee Handle

The T-900NL MxF no lead forged brass large-port ball valve with tee handle. It features a bottom-loaded blowout-proof stem with a dual O-ring seal design. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly. The tee-handle can be used as gauge-cock isolation valves, without the gauge face obstruction associated with a lever-handle equipped valve.

T/S-2102 Waste Cap

| Waste Cap for T/S-2101 Ball Valve Drains

T-900 MNPT x FNPT

| Forged Brass Mini Large Port MNPT x FNPT Transition Ball Valve

The T-900 MxF forged brass large-port ball valve features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly.

T-900NL MNPT x FNPT

| No Lead Forged Brass Mini Large Port MNPT x FNPT Transition Ball Valve

The T-900NL MxF no lead forged brass large-port ball valve features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly.

T-1007

| Forged Brass Full Port FNPT x Sweat Ball Valve

The T-1007 forged brass full port ball valve with a sweat x female thread configuration. It is designed to connect boilers to copper tube.

T-1960NL

| No Lead DZR Forged Brass Cold Expansion PEX Ball Valve

The T-1960NL no lead ball valve features a cold expansion PEX end, a bottom-loaded, blowout-proof stem design with dual-seal PTFE packing and stem seats to assure a positive seal. The valve body is made of DZR forged brass, which resists corrosion from exposure to various water conditions, while the self-cleaning ball is made from stainless steel. This press by PEX ball valve is compatible with both residential and commercial PE-RT and PEX plumbing systems.

S-2011RFLG

| Forged Brass Isolation Ball Valve with Rotating Flange

The S-2011RFLG forged brass full port isolation ball valve with a rotating flange by sweat end features a positive-seal, blowout-proof stem design with dual Teflon* packing and EPDM rubber O-ring seals. Standard diamond-shaped pump flange connection rotates, to allow infinite valve positioning.

NL Press TWHV Kit

| LegendPress No Lead Forged Brass Tankless Water Heater Valve Kit

S-2012RFLG

| Forged Brass Isolation Ball Valve with Rotating Flange with Purge

The S-2012RFLG forged brass full port isolation ball valve with a rotating flange by sweat end and a purge drain. It features a positive-seal, blowout-proof stem design with dual Teflon* packing and EPDM rubber O-ring seals. Standard diamond-shaped pump flange connection rotates, to allow infinite valve positioning. Elongated flange holes permit trouble-free installation onto both standard and high-velocity pump flanges. It includes an integrated drain valve with a tethered cap.

T-2012RFLG

| Forged Brass Isolation Ball Valve with Rotating Flange with Purge

The T-2012RFLG forged brass full port isolation ball valve with a rotating flange by female thread end and a purge drain. It features a positive-seal, blowout-proof stem design with dual Teflon* packing and EPDM rubber O-ring seals. Standard diamond-shaped pump flange connection rotates, to allow infinite valve positioning. Elongated flange holes permit trouble-free installation onto both standard and high-velocity pump flanges. It includes an integrated drain valve with a tethered cap.

T-715 Locking Lever Handle

| Steel Lever Handle with Locking Device for T-715 Stainless Steel Ball Valves

TWHV EPDM Union Gasket

| EPDM Union Gasket for Tankless Water Heater Valves

Tankless water heater valve kit Union Gasket.

S-1002FLG

| Forged Brass Flanged Isolation Ball Valve

The S-1002FLG full port isolation ball valve with flange has an adjustable gland follower design. It features a sweat end configuration x flange, with bottom loaded, teflon isolated, blowout-proof stem.

T-1002FLG

| Forged Brass Flanged Isolation Ball Valve

The T-1002FLG forged brass full port isolation ball valve with flange has an adjustable gland follower design. It features a thread end configuration x flange, with bottom loaded, teflon isolated, blowout-proof stem.

T-2002NL

| No Lead Forged Brass Full Port Compression Ball Valve with Drain

The T-2002NL no lead DZR forged brass compression end ball valve with drain. Its bubble-tight shutoff and capped waste port permit isolation, drain down and servicing of the plumbing system, for maintenance or to prevent freeze-up. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.

T-717 Packing & Seats

| PTFE Packing Gland and Seats for T-717 Stainless Steel Ball Valves

P-1002CCNL

| LegendPress No Lead Forged Brass Full Port Ball Valve with Cap and Chain

P-200 Lever Handle

| Stainless Steel Lever Handle for P-200 Ball Valves

The P-200 LegendPress full port ball valve with Lever Handle offers the same reliability as our 1001-series ball valves but in a press-to-connect configuration. It features the Viton dual o-ring stem design, complete with a tamper-evident locking seal, integrated press ends, and extra-deep tube sockets with two EPDM o-rings to assure the seal. The P-200 also features a stainless steel lever handle, TFM-PTFE seats, and a scale-resistant chrome-plated ball

S-2001STNL

| No Lead DZR Forged Brass Full Port Ball Valve with Stainless Steel Trim

T-2001STNL

| No Lead DZR Forged Brass Full Port Ball Valve with Stainless Steel Trim

T-1009 Ferrule

| Ferrule for T-1009 Ball Valves

T-1960NL Drop Ear

| No Lead DZR Forged Brass Cold Expansion PEX Ball Valve with Drop Ear

The T-1960NL no lead drop ear ball valve features a cold expansion PEX end, a bottom-loaded, blowout-proof stem design with dual-seal PTFE packing and stem seats to assure a positive seal. The valve body is made of DZR forged brass, which resists corrosion from exposure to various water conditions, while the self-cleaning ball is made from stainless steel. This press by PEX ball valve is compatible with both residential and commercial PE-RT and PEX plumbing systems.

NL Press TWHV Kit with PRV

| LegendPress No Lead Forged Brass Tankless Water Heater Valve Kit with Pressure Relief Valve

NL FNPT TWHV Kit

| No Lead Forged Brass FNPT Tankless Water Heater Valve Kit

This no lead tankless water heater valve kit features a full port ball-type valve to assure positive shutoffs. The dual o-ring stem seals are maintenance-free and keep their seal regardless of pressure and temperature changes. These valves have one female threaded union end, and are available in five different configurations: female-threaded, sweat, crimp/cinch PEX, cold expansion PEX, and press-to-connect. This kit includes two valves, one with red handles, the other blue.

NL Sweat TWHV Kit

| No Lead Forged Brass Sweat Tankless Water Heater Valve Kit

P-2012RFLG

| LegendPress No Lead Forged Brass Full Port Isolation Ball Valve with Rotating Flange and Purge

The S-2012RFLG forged brass full port isolation ball valve with a rotating flange by press end and a purge drain. It features a positive-seal, blowout-proof stem design with dual Teflon* packing and EPDM rubber O-ring seals. Standard diamond-shaped pump flange connection rotates, to allow infinite valve positioning. Elongated flange holes permit trouble-free installation onto both standard and high-velocity pump flanges. It includes an integrated drain valve with a tethered cap.

T-1009NL

| No Lead Forged Brass Full Port Compression Ball Valve

The T-1009NL no lead forged brass compression end ball valve. It features bottom-loaded, blowout-proof stem with a dual-seal PTFE packing and dual EPDM rubber O-ring design. Its quarter-turn, positive-shutoff full port design, make the T-1009NL the ideal replacement for a leaking multi-turn, drip-tight, reduced port gate valve. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.

NL F1807 PEX TWHV Kit

| No Lead Forged Brass Crimp Pex Tankless Water Heater Valve Kit

NL F1960 PEX TWHV Kit

| No Lead Forged Brass Cold Expansion Pex Tankless Water Heater Valve Kit

NL FNPT TWHV Kit with PRV

| No Lead Forged Brass FNPT Tankless Water Heater Valve Kit with Pressure Relief Valve

NL Sweat TWHV Kit with PRV

| No Lead Forged Brass Sweat Tankless Water Heater Valve Kit with Pressure Relief Valve

T-1960NL Drop Ear w/Drain

| No Lead DZR Forged Brass Cold Expansion PEX Drop Ear Ball Valve with Drain

The T-1960NL no lead drop ear ball valve with drain features a cold expansion PEX end, a bottom-loaded, blowout-proof stem design with dual-seal PTFE packing and stem seats to assure a positive seal. The valve body is made of DZR forged brass, which resists corrosion from exposure to various water conditions, while the self-cleaning ball is made from stainless steel. This press by PEX ball valve is compatible with both residential and commercial PE-RT and PEX plumbing systems.

T-1960NL F1960 PEX x MNPT

| No Lead DZR Forged Brass Cold Expansion PEX x MNPT Transition Ball Valve

The T-1960NL no lead ball valve features a cold expansion 1960 PEX end x a MNPT. It also has a bottom-loaded, blowout-proof stem design with dual-seal PTFE packing and stem seats to assure a positive seal. The valve body is made of DZR forged brass, which resists corrosion from exposure to various water conditions, while the self-cleaning ball is made from stainless steel. This press by PEX ball valve is compatible with both residential and commercial PE-RT and PEX plumbing systems.

T-1960NL F1960 PEX x Sweat

| No Lead DZR Forged Brass Cold Expansion PEX x Sweat Transition Ball Valve

The T-1960NL no lead ball valve features a cold expansion 1960 PEX end x sweat. It also has a bottom-loaded, blowout-proof stem design with dual-seal PTFE packing and stem seats to assure a positive seal. The valve body is made of DZR forged brass, which resists corrosion from exposure to various water conditions, while the self-cleaning ball is made from stainless steel. This press by PEX ball valve is compatible with both residential and commercial PE-RT and PEX plumbing systems.

S-2102NL

| No Lead DZR Forged Brass Full Port Ball Valve with Drain

The T-2102NL no lead DZR forged brass full port ball valve with drain in a sweat configuration. It features bottom-loaded, blowout-proof stem with a dual-seal PTFE packing and EPDM rubber O-ring design. A bubble-tight shutoff and capped waste port, permit isolation, draindown and servicing of the plumbing system, for maintenance or to prevent freeze-up. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.

T-2102NL

| No Lead DZR Forged Brass Full Port Ball Valve with Drain

The T-2102NL no lead DZR forged brass full port ball valve with drain in a female thread configuration. It features bottom-loaded, blowout-proof stem with a dual-seal PTFE packing and EPDM rubber O-ring design. A bubble-tight shutoff and capped waste port, permit isolation, draindown and servicing of the plumbing system, for maintenance or to prevent freeze-up. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.

T-712 Lever Handle

| Steel Lever Handle for T-712 Stainless Steel Ball Valves

S-2001STNLX

| No Lead DZR Forged Brass Full Port Ball Valve with Stainless Steel Trim, Stem Extension, and Locking Handle

T-2100

| Forged Brass Full Port Three-Way Ball Valve

The T-2100 forged brass full port 3-way ball valve. Its full port design permits exceptional flow characteristics. Its featured L-port design diverts media from the branch connection to either of the run connections. Directional arrows on the handle indicate flow-path. It is ideal for commercial or industrial diverter applications

P-2011

| LegendPress Forged Brass Isolation Ball Valve with Rotating Flange

The S-2011RFLG forged brass full port isolation ball valve with a rotating flange by press end features a positive-seal, blowout-proof stem design with dual Teflon* packing and NBR rubber O-ring seals. Standard diamond-shaped pump flange connection rotates, to allow infinite valve positioning. Elongated flange holes permit trouble-free installation onto both standard and high-velocity pump flanges.

NL F1807 PEX TWHV Kit with PRV

| No Lead Forged Brass Crimp Pex Tankless Water Heater Valve Kit with Pressure Relief Valve

NL F1960 PEX TWHV Kit with PRV

| No Lead Forged Brass Cold Expansion Pex Tankless Water Heater Valve Kit with Pressure Relief Valve

T-1002LD Locking Lever Handle

| Steel Lever Handle with Locking Device for T/S-1002 Ball Valves

T/S-2000 Lever Handle

| Stainless Steel Lever Handle and Nut for T/S-2000 Ball Valves

T-2010NL

| No Lead DZR Forged Brass Full Port FNPT x Insert Transition Ball Valve

The T-2010NL no lead DZR forged brass full port ball valve features a bottom-loaded, blowout-proof stem with a dual-seal PTFE packing and EPDM rubber O-ring design. Assuring positive sealing under temperature and pressure extremes. Its full-length barbed insert by female thread configuration provides ample clamping surface for the PE pipe. Its lead-free design is suitable for all no-lead potable water installations, in full compliance of all lead-free plumbing laws.