You searched for "Mini Ball"

The chrome-plated full port mini ball valve features a one piece barstock-type body with female thread end. The short-pattern body type can be installed in confined piping installations.

The chrome-plated full port mini ball valve features a one piece barstock-type body with female thread x male thread end. The short-pattern body type can be installed in confined piping installations.

The T-710T conventional port .316 stainless steel compact / mini ball valve with a Tee handle. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread configuration.

The T-710MxF-T conventional port .316 stainless steel compact / mini ball valve with a Tee handle. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread x female thread configuration.

The T-800T is a traditional alloy conventional port Micro ball valve featuring a female thread end with an o-ring stem design.

The T-800TNL is a no lead conventional port Micro ball valve featuring a female thread end with an o-ring stem design.

The T-801NL no lead cast brass ball valve test cock featuring a male thread by female thread configuration with an o-ring stem design.

The T-810 is a traditional allow full port Micro Ball gauge cock valve featuring a female thread end with an o-ring stem design. The handle is a Dacromet-coated steel short lever design.

Legend offers a variety of our products' Installation Instructions (IOMs).

The T-900 MxF forged brass large-port ball valve features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly.

The T-900NL MxF no lead forged brass large-port ball valve features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly.

The T-900 MxF forged brass large-port ball valve with tee handle features a bottom-loaded blowout-proof stem is a maintenance-free, dual O-ring seal design, eliminating the need to tighten a packing nut. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly. The tee-handle can be used as gauge-cock isolation valves, without the gauge face obstruction associated with a lever-handle equipped valve.

The T-900NL MxF no lead forged brass large-port ball valve with tee handle. It features a bottom-loaded blowout-proof stem with a dual O-ring seal design. The improved 3M Dyneon TFM PTFE seats and thrust washers provide enhanced sealing and isolation between the body and ball-stem-handle rotating assembly. The tee-handle can be used as gauge-cock isolation valves, without the gauge face obstruction associated with a lever-handle equipped valve.

The T-710 conventional port .316 stainless steel compact / mini ball valve. It features a one-piece cast body, a bottom-loaded blowout-proof stem, and a latch-lock handle with a male thread configuration.

Save time and enhance job site safety with LegendPressCSG fittings. Crafted from durable carbon steel, these press fittings are ideal for fuel gas and compressed air applications. Featuring HNBR O-rings known for their exceptional resilience, these fittings offer superior chemical resistance, minimal compression set, and low gas permeability, ensuring an airtight seal even in the most challenging conditions. LegendPressCSG fittings are available in 29 models and 148 configurations, with sizes ranging from 1/2” to 2”.

SmartClick is the future of tool-free, permanent fittings for PE-RT and PEX tube, installing up to 35% faster than any other fitting system available today. You create a permanent connection when you hear, feel, and see the "click." Constructed from a highly resilient PPSU polymer, SmartClick fittings will last the life of your water system. To install a fitting, all you need is a straight-blade tube cutter to ensure the end is square. Then, push the fitting onto the tube until it clicks. The insert barbs feature two EPDM o-rings per side, ensuring a secure and permanent seal when paired with the spring steel clamp. SmartClick has been third-party tested for compliance with several different regulatory standards and plumbing codes for behind-the-wall use. Legend even offers a 30-Year SmartClick System Warranty.