You searched for "90° wrot copper street elbow"

90° Copper Street Elbow

90° Copper Street Elbow

| Wrot Copper 90° Street Elbow

90° Copper Long Turn St. Elbow

90° Copper Long Turn St. Elbow

| Wrot Copper 90° Long Turn Street Elbow

90° Short Radius Press St Elb

90° Short Radius Press St Elb

| LegendPress Copper 90° Short Radius Street Elbow

90° Press Extended St. Elbow

90° Press Extended St. Elbow

| LegendPress Copper 90° Extended Street Elbow

The LegendPress wrot copper extended 90° street elbow uses the VUS profile jaws to install onto ASTM B88 types K, L and M hard-drawn copper tubing. This configuration is press x fitting. It is NSF certified to NSF/ANSI Standard 61, including NSF/ANSI 372. Press-type end connections eliminate the need for soldering, reducing labor and material costs and eliminating the fire hazard associated with the process.

90° Press Long Street Elbow

90° Press Long Street Elbow

| LegendPress Copper 90° Press x FTG Long Turn Street Elbow

90° Lrg. Press Long St. Elbow

90° Lrg. Press Long St. Elbow

| LegendPress Copper Large Diameter 90° Press x FTG Street Elbow

The LegendPress wrot copper large diameter 90° street elbow uses the XL-C profile jaws to install onto ASTM B88 types K, L and M hard-drawn copper tubing. This configuration is press x fitting. It is NSF certified to NSF/ANSI Standard 61, including NSF/ANSI 372. Press-type end connections eliminate the need for soldering, reducing labor and material costs and eliminating the fire hazard associated with the process.

90° Press Short Radius Elbow

90° Press Short Radius Elbow

| LegendPress Copper 90° Short Radius Street Elbow

NL Press Insert Stiffener

NL Press Insert Stiffener

| LegendPress No Lead Brass Insert Stiffener

The LegendPress no lead bronze insert stiffener is for use with Legend’s Extended 90° Street Elbow (450-034P) to reinforce finned tubes. Standard finned tubing does not meet the minimum wall thickness requirements for press connections. The insert stiffener is a bronze sleeve, that is inserted into a finned tube pipe. The stiffener must be fully inserted to the stop for a proper connection. The extended street elbow should not be pressed if the insert stiffener is not fully inserted.