DG-CLC-2023

LMV-3 Three-Way Mixing Valve is designed for use in hydronic heating and cooling systems. This valve is designed to provide a desired system fluid temperature by mixing fluid at a higher temperature from the heat source (typically a boiler) with mediums at a lower temperature returning from the heating zone. It can also be for cooling applications to mix fluid from the chiller (or other water cooling sources) with warmer fluid returning from the zones to achieve the desired system fluid temperature. Key Features at a Glance: • Economical method to supply multiple water temperatures to different zones of the same system • Compatible with most popular mixing controllers • Capable of both outdoor reset and set-point mixing strategies • Compatible with all LegendConnect ® system fittings LMV-3 Kits include an LMV-3 and two (2) end connectors of the chosen type. 800-766S 1-1/4” Sweat LMV-3 1 800-766M 1-1/4” MNPT LMV-3 1 800-765F 1” FNPT LMV-3 1 800-766F 1-1/4” FNPT Connector Kit LMV-3 1 800-765P 1” Press LMV-3 1 800-766P 1-1/4” Press LMV-3 1 800-765VC 1” Comp. Isolation Valve LMV-3 1 800-765VF 1” FNPT Isolation Valve LMV-3 1 800-766VF 1-1/4” FNPT Isolation Valve LMV-3 1 24V Floating Actuator – Must be paired with a controller that can provide a 24V output signal (sold separately). Compatible with 0-10 controllers. 800-761 One-size FNPT 24-Volt Actuator; For 0-10 Controllers 1 Stand-Alone Actuators contain a proportional-integral (PI) control that uses feedback from a pre-wired temperature probe (included) to control the 3-way mixing valve. No need to connect to a separate control box or system. 800-762 One-size FNPT 1 Radiant Hydronic Systems - LMV-3 LMV-3Three-Way MixingValve Part No. Size Configuration Model Qty. LMV-3 LegendConnect Forged Brass Three-Way Mixing Valve 800-761 800-762 Mixing Valve Actuators Comp. Isolation Valve FNPT Isolation Valve LegendPress Sweat FNPT MNPT 348 | legendvalve.com | LT-CLC-2023 RADIANT HYDRONIC SYSTEMS