DG-CLC-2023

800-345 5/8” x 1-1/2” For foam panels 1” or thicker Bag of 100 800-348 5/8” x 2” For foam panels 1-1/2” or thicker Bag of 100 These pins are designed to be manually inserted into QuickTherm ® knobs to hold down large diameter tube – typically 3/4” – in areas where additional support may be required. Pins work with all sizes of tube and all QuickTherm models. 800-349 3” x 1” For any tube size in QuickTherm panels Bag of 100 These supports are used to hold flexible tubing in a 90˚ bend without a need for fitting elbows, creating a neat and professional finish. 800-305 Up to 1/2” For up to 1/2”Tube 50 1 800-304 Up to 3/4” For up to 3/4”Tube 50 1 509-003 Up to 1/2” Bend Support with NailTab 50 1 509-004 Up to 3/4” Bend Support with NailTab 50 1 509-005 Up to 1” Bend Support with NailTab 50 1 These sleeves are used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid application after tubing has been installed and before the concrete pour. 800-313 1/2” 12” LongTube Sleeve 50 1 800-314 3/4” 12” LongTube Sleeve - 1 Large Diameter Tube Holding Pin Heavy Duty Tube Holding Pin 90° Plastic Tube Bend Support 800-305 - 1/2” 800-304 - 3/4” 509-003 Tube Protection Sleeve for PE-RT & PEX Tube Radiant Hydronic Systems - Tube Installation Accessories Certifications Part No. Size Configuration Cs. Ct. 312 | legendvalve.com | LT-CLC-2023 RADIANT HYDRONIC SYSTEMS