Radiant Floor and Tubing Accessories
Alphabetical List:
800-363
Extruded Heat Transfer Plates – Patented dual track design allows for either 3/8” or 1/2”
tubing.
Each panel is 48” long and has 8 pre-drilled mounting holes.
Designed to create high performance hydronic radiant heat systems for new and retro-fit projects.
The rigid extrusion and tight tube grip provide excellent heat transfer without expansion noise.
Accepts PEX, PEX-AL-PEX, PE-RT and copper tubing without the need for additional fasteners or adhesives.
Each panel is 48” long and has 8 pre-drilled mounting holes.
Designed to create high performance hydronic radiant heat systems for new and retro-fit projects.
The rigid extrusion and tight tube grip provide excellent heat transfer without expansion noise.
Accepts PEX, PEX-AL-PEX, PE-RT and copper tubing without the need for additional fasteners or adhesives.
More Information:
800-364
Extruded Aluminum Heat Transfer Plates – For use with 3/8” or 1/2” PEX tubing. Plates are 3-1/2” x 4’ long and pre-drilled for wood screws.
More Information:
800-333
Tube Mounting Rail – Used to hold tubing to rigid foam, wood or concrete with mounting holes.
More Information:
800-334
Tube Mounting Rail – Used to hold tubing to rigid foam, wood or concrete with mounting holes.
More Information:
800-251
Ratchet Tube Cutter - CPVC and PVC up to 1-1/4"
More Information:
800-523
Standard Plastic Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-524
Standard Plastic Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-525
Standard Plastic Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-513
Plastic Tube Isolation Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-514
Tube Isolation Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-515
Tube Isolation Clamp, 2 Pre-drilled holes, Bags of 100
More Information:
800-503
Tube Bend Support 90° – Holds tube in a tight radius 90° bend without a fitting elbow and without fear of “kinking”
More Information:
800-305
Tube Bend Support 90° – Used to hold flexible tubing in a 90° bend without a fitting elbow and creates a neat, professional appearance.
More Information:
800-304
Tube Bend Support 90° – Used to hold flexible tubing in a 90° bend without a fitting elbow and creates a neat, professional appearance.
More Information:
509-003
Plastic Bend Support with Nail Tab for 1/2" Tube
More Information:
509-004
Plastic Bend Support with Nail Tab for 3/4" Tube
More Information:
509-005
Plastic Bend Support with Nail Tab for 1" Tube
More Information:
800-349
All tube sizes for QT-100, 200, & 300
More Information:
800-345
1-1/2" long for panels 1" or thicker
More Information:
800-348
2" long for panels 1-1/2" or thicker
More Information:
800-313
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
More Information:
800-314
Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after tubing has been installed and before concrete pour.
More Information:
830-819
Emergency Repair Adapter for 5/16" to 3/4" Manifold Connectors for PEX Tubing
More Information:
800-323
Tube Track & Tube Track Duo – Used to hold tubing to rigid foam, wood or concrete. Clips at end of each piece allow 3-1/4’ (39”) sections to snap together.
More Information:
800-324
Tube Track & Tube Track Duo – Used to hold tubing to rigid foam, wood or concrete. Clips at end of each piece allow 3-1/4’ (39”) sections to snap together.
More Information:
800-340
Tube Installation Staple Tool- upright hand Staple tool for installing different sizes of tubing into EPS foam board.